Recording tips (continued)
1 Press FUNCTION repeatedly until “MD” appears in the display.
2
3 Press . or > repeatedly until “Setup?” appears in the display, and then press ENTER/YES on the remote.
4 Press . or > repeatedly until “S.Space Off” (or “S.Space On”) appears, and then press ENTER/YES on the remote.
5 Press . or > repeatedly to select the setting, and then press ENTER/YES on the remote.
To | Select |
Turn on the Smart | S.Space On (factory |
Space function | setting) |
|
|
Turn off the Smart | S.Space Off |
Space function |
|
|
|
6 Press MENU/NO on the remote.
To continue and record, follow the procedures described on the various recording pages.
Tip
To restart the recording when “Auto Cut” appears in the display, press u (or X on the remote).
Adjusting the recording level
You can adjust the recording level when recording to an MD from the tuner or from an optional component connected to the TAPE IN or DIGITAL OPTICAL IN jack.
1 Press FUNCTION repeatedly to select the desired source to record.
2 Press REC/REC IT to stand by for recording.
3 Press MENU/NO on the remote to display “Setup?”, and then press ENTER/YES on the remote.
4 Press . or > repeatedly until “LevelAdjust?” appears, and then press ENTER/YES on the remote.
5 Press . or > to adjust the recording level.
While monitoring the sound, adjust to the optimum level while making sure that “OVER” does not appear in the display at the loudest portion.
6 Press ENTER/YES on the remote.
7 Press MENU/NO on the remote.
8 Press x.
To continue and record, follow the procedures described on the various recording pages.
Tips
•You can also adjust the recording level during recording.
•Once adjusted, the recording level is maintained until you adjust it again.
26