CD
Check and CD Position appear alternately
The disc could not be read properly.
Complete!
CD editing (Disc Memo) finished normally.
Eject
The CD player is ejecting the CD.
File Full
There are already 100 disc titles stored in the system.
Initialize
The system is being initialized. You cannot load a CD during this time. Wait until “Initialize” disappears from the display.
No Disc
There is no disc in the CD player.
You have reached the end of the CD while pressing and holding Mduring playing pause.
Push STOP!
You pressed PLAY MODE on the remote during play.
Step Full!
You tried to program 26 tracks or more.
Personal Computer
Busy NOW!
You pressed NET MD during
Check USB
The USB cable is not connected properly. Check the connection.
CONNECT
You are
Net MD NOW
You pressed `/1while the Net MD function is on. Press NET MD to turn off the Net MD function before you press `/1. You can also turn off the system by pressing `/1again while “Net MD NOW” is displayed.
Specifications
Main unit
Amplifier section
European model:
DIN power output (rated): 15 + 15 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 + 20 W
(6 ohms at 1 kHz, 10% THD)
Music power output (reference):
45 + 45 W
Other models:
The following measured at 220 V AC, 60 Hz DIN power output (rated): 15 + 15 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 20 + 20 W
(6 ohms at 1 kHz, 10% THD)
Inputs
TAPE IN (stereo minijack):
Sensitivity 250 mV, impedance 47 kilohms
DIGITAL OPTICAL IN (Supported sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
TAPE OUT (stereo minijack):
Sensitivity 250 mV, impedance 1 kilohm
PHONES (stereo minijack):
Accepts headphones with an impedance of 8 ohms or more
continued
Information Additional
63