Fade-in and Fade-out

Recording

1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.

2 Press PLAY MODE on the remote repeatedly until both “PROGRAM” and “SHUF” disappear.

3 Press MENU/NO on the remote to display “Edit Menu.”

4 Press .or >repeatedly until “S.F Edit?” appears in the display, and then press ENTER/YES on the remote.

5 Press .or >repeatedly until “Fade In?” or “Fade Out?” appears in the display, and then press ENTER/YES on the remote.

6 Press .or >repeatedly to select the track number you want to Fade-in or Fade-out, and then press ENTER/ YES on the remote.

“Time 5.0s” appears.

7 While monitoring the sound, press . or >repeatedly to change the Fade- in, or Fade-out recording time.

The system plays the portion that will be recorded over using the Fade-in or Fade-out Recording. You can set the time at any value between 1.0 second and 15.0 seconds in 0.1-second increments. You cannot set the time longer than the track.

8 Press ENTER/YES on the remote. “S.F Edit OK?” appears.

9 Press ENTER/YES on the remote.

“S.F Edit: **%” appears while the track is being recorded. When the recording finishes, “Complete!” appears for a few seconds.

To cancel the operation

Press MENU/NO on the remote during steps 4 through 8. After recording starts in step 9, you cannot interrupt the operation.

Notes

•Do not disconnect the power cord or move the system while recording is in progress. This may damage the recording data, preventing recording from being performed properly.

•Do not use an MD that is damaged or dirty, this may prevent data from being recorded properly.

•Repeatedly changing the recording level results in poor sound quality.

•The recording level will not return to the exact original level once the recording level has been changed even if it is returned to the original level.

•While the timer is activated, you cannot change the recording level.

•You cannot undo the S.F Edit Function even if you use the Undo Function.

— MD Editing

41