C14/Toc Error

The MD deck cannot read the disc information properly.

cReplace the MD.

cErase all the recorded contents of the MD using All Erase Function (see page 35).

C41/Cannot Copy

The sound source is a copy of a commercially available music software, or you tried to record a CD-R (Recordable CD) or CD-RW (ReWritable CD).

cThe Serial Copy Management System prevents making a digital copy (see page 57). You cannot record a CD-R or CD-RW.

C71/Check OPT-IN

This appears momentarily because of the signal of the digital broadcast during recording.

cThere is no affect on the recorded contents. No component is connected to the DIGITAL OPTICAL IN jack, or a digital component is not connected properly.

cConnect a digital component to the DIGITAL OPTICAL IN jack properly using a digital connecting cable (not supplied, see page 49).

The connected digital component is not turned on.

cSee the operating instructions supplied with the connected component and confirm whether the component is turned on.

The digital connecting cable connected to the DIGITAL OPTICAL IN jack is pulled out, or the connected digital component is turned off during digital recording.

cConnect the cable, or turn on the digital component.

E0001/MEMORY NG

There is an error in the internal data that the system needs in order to operate.

cConsult your nearest Sony dealer.

E0101/LASER NG

There is a problem with the optical pickup.

cThe optical pickup may have failed. Consult your nearest Sony dealer.

Messages

One of the following messages may appear or flash in the display during operations.

MD

Assign None

•You have created a new group with no tracks.

•All the recorded tracks are already registered to groups.

Auto Cut

The MD deck is pausing the recording because silence continued for 30 seconds or more during recording.

Blank Disc

The inserted recordable MD is new, or all tracks on the MD have been erased.

Cannot Edit

•A pre-mastered MD is in the deck.

•You tried to edit in Program or Shuffle Play mode.

•You tried to change the recording level of a track recorded in LP2 or LP4 mode.

Cannot REC

•A pre-mastered MD is in the deck.

•The function is switched to MD.

Complete!

The editing operation of MDs is completed.

Disc Full!

There is no time remaining on the MD.

Eject

The MD deck is ejecting the MD.

Group Full!

You tried to create more than the maximum number of the groups or there is not enough space in the TOC of the MD for group registration.

Erase the unnecessary disc titles or track titles.

continued

Information Additional

61