7 Press ENTER/YES on the remote to enter the selected track.
8 Press .or >on the remote repeatedly to select the last track (of the series of tracks) to be registered.
The selected track number flashes and the deck starts to play the track for your confirmation.
9 Press ENTER/YES on the remote to enter the selected track.
The deck starts to play the last registered group track.
To create a new group with no tracks
In step 6, press .or >on the remote until “None” appears, and then press ENTER/ YES.
To register a single track
In step 7, press ENTER/YES on the remote twice.
Notes
•You cannot register the same track to two or more groups.
•When there are no more
•A newly created group must be labeled if no non- group tracks has been registered to it.
•If you do not label the group in step 5, the group will be labeled with the default title (e.g., Group3)
Releasing group tracks
— Release Function
You can cancel the registration of tracks in one group or all groups at once. (Note that the tracks themselves in the selected groups will not be erased.)
Releasing group tracks by group
1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.
2 Press GROUP ON/OFF on the remote in stop mode.
“GROUP” lights up.
3 Press GROUP SKIP on the remote repeatedly until the group you want to release appears.
4 Press MENU/NO on the remote.
5 Press .or > on the remote repeatedly until “Gp Release?” appears, and then press ENTER/YES on the remote.
“REL” and the selected group number (e.g. “Gp 3”) appear.
6 Press ENTER/YES on the remote.
continued
— MD Editing
33