Self-diagnosis display (continued)

Impossible

•You tried to make an impossible editing operation.

•You tried to operate the connected Net MD during the timer-activated playback.

•You cannot combine or erase the tracks due to the system limitations of MDs.

•“Impossible” appears, when you specify the division point at the beginning or end of a track. Press .or >to shift the position.

Incomplete!

Adjustment of the recording level after recording or Fade-in and Fade-out procedures have failed since the unit was either subject to vibration or there is a damaged or dirty disc in the tray. Place the unit in a stable place to minimize shock and vibration. Do not use damaged or dirty discs.

Initialize (flashing)

The Setup Menu settings have been lost.

Or the contents recorded by the timer have disappeared over time and are not available for saving to disc, or Program Play could not be activated since the program has disappeared over time.

(The message flashes for about 4 seconds when you turn on the deck by pressing ?/1.)

Name Full

There is no more space to store track or disc titles.

No Change

When changing the recording level after recording, the recording level did not change since you pressed ENTER/YES on the remote without making the adjustment.

No Disc

There is no disc in the MD deck.

— OVER —

You have reached the end of the MD while pressing and holding Mduring playing pause.

Push STOP!

You pressed PLAY MODE on the remote during play.

—Rehearsal—

The MD is playing the specified dividing point for confirmation during the A-B Erase function or the Divide function.

S.F Edit!

You attempted to perform other operations during S.F Edit (adjusting the recording level after recording, Fade-in and Fade-out). You cannot perform other operations during S.F Edit.

S.F Edit NOW

You pressed `/1during S.F Edit (adjusting the recording level after recording, Fade-in and Fade- out). If you turn off the power before S.F Edit is finished, the editing will not be properly overwritten. Turn the power off after editing is complete.

If you want to turn off the power during editing, press `/1again while the message is displayed.

Smart Space

The signal was input again after silence continued for 3 or more but less than 30 seconds during digital recording.

Step Full!

You try to program 26 or more tracks (steps).

Text Protect

There is CD TEXT information which cannot be recorded on the MD.

TOC Reading

The MD deck is reading the TOC information of the MD.

TOC Writing

The MD deck is writing the information of recorded or edited contents.

Track End

You have reached the end of the track while adjusting the dividing point during the Divide Function.

Tr Protected

You tried to erase tracks on an MD that is write- protected.

62