Labeling the preset
stations
— Station Name
You can label each preset station with up to 10 characters (Station Name).
1 Tune in the desired station you want to label (see page 43).
2 Follow the same procedures as from step 2 to 6 on “Labeling a CD” (see page 13).
Checking the station name
Press DISPLAY on the remote repeatedly.
The display changes as follows:
Station name*1 tFrequency*2 tClock*2 t Preset Equalizer name*2 tVolume*2 t Station name*1 t...
*1 The station name is skipped if the station is unlabeled.
*2 After appearing for 8 seconds, the display will revert back to the station name (or to the frequency if the station is unlabeled).
To erase the station name
1Tune in the station.
2Press NAME EDIT/SELECT on the remote.
3Press CLEAR on the remote repeatedly to erase the name.
4Press ENTER/YES on the remote.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS)*1 is a broadcasting service that allows radio stations to send additional information along with the regular program signal.
Note
RDS may not work properly if the station you have tuned in is not transmitting the RDS signal properly or if the signal is weak.
*1 Not all FM stations provide RDS service, nor do they all provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY on the remote, the display changes as follows:
Station name*2 tFrequency tClock t Preset Equalizer name tVolume tStation name*2 t…
*2 If the RDS broadcast is not properly received, the station name may not appear in the display.
44