Sony CMT-C7NT non-group, Registering, tracks as group tracks in a newly created group

6 Press .or > on the remote repeatedly to search the first track (of the series of tracks) to be registered. The selected track number flashes and the deck starts to play the track for your confirmation.

Follow the same procedures as from step 3 to 6 in “Labeling an MD” on page 29.

5

“Edit Menu” flashes.

Press MENU/NO on the remote.

3

4 Press .or > on the remote repeatedly until “Gp Create?” appears, and then press ENTER/YES on the remote.

2 Press GROUP ON/OFF on the remote in stop mode.

“GROUP” lights up.

Press MENU/NO on the remote. “Edit Menu” flashes.

Registering non-group tracks as group tracks in a newly created group

— Create Function

Only a series of tracks that have not been registered to any group can be registered with this procedure. You can also use this procedure to register tracks recorded on a system that does not support the group function.

1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.

Labeling a group (continued)

Erasing a group title

1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.

2 Press GROUP ON/OFF on the remote in stop mode.

“GROUP” lights up.

3 Press GROUP SKIP on the remote repeatedly until the group title you want to erase appears.

4

5 Press .or >on the remote repeatedly until “Nm Erase?” appears, and then press ENTER/YES on the remote.

The selected group number (e.g. “Gp 3”) flashes.

6 Press ENTER/YES on the remote.

The default group title appears again (e.g,.“Group3”).

Note

You cannot erase the title of a group that contains no tracks.

32