5 Press .or >repeatedly until the new track position appears.

Original track

New track position

number

 

6 Press ENTER/YES on the remote.

“Complete!” appears.

Note

If you move a non-group track between two group tracks, the moved track will be registered to the group as a group track. (The reverse is also true, as the status of the moved track is determined by the track that precedes it.).

Dividing recorded tracks

— Divide Function

You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered.

Example: Dividing track 2 into two tracks.

Track

 

 

 

 

 

 

 

 

 

 

number

 

 

1

2

 

 

 

 

 

3

 

 

 

 

 

 

Original

A

 

 

B

 

 

C

 

D

tracks

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Divide track 2 into

 

 

 

 

 

 

 

 

 

 

track B and C

After

1

2

 

 

3

 

 

4

 

 

 

A

 

 

B

C

 

D

DIVIDE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.

2 Press MENU/NO on the remote to display “Edit Menu.”

3 Press .or >repeatedly until “Divide?” appears, and then press ENTER/YES on the remote.

4 Press .or > repeatedly until the track number of the track you want to divide appears. Then, while listening to rehearsal play, press ENTER/YES on the remote at the point where you want to divide the track.

“—Rehearsal—” appears and the portion to be divided is played repeatedly.

continued

— MD Editing

37