Listening to the radio

— Preset Tuning

Presetting radio stations in the system’s memory in advance make it easy to tune in those stations later (see “Presetting radio stations” on page 42).

1 Press FUNCTION (or TUNER BAND on the remote) repeatedly to select FM or AM.

2 Press TUNING MODE on the remote repeatedly until “PRESET” appears in the display.

3 Press TUNING + or – repeatedly to select the desired station .

The preset number and the frequency (or station name*1 or RDS station name*2) appear.

*1 The station name appears only if you have labeled the station (see page 44).

*2 European model only

To turn off the radio

Press ?/1.

To enter preset number over 10 (on the remote only)

1Press >10.

2Enter the corresponding digits.

To enter 0, press 10/0 instead.

Example:

To enter preset number 20, press >10, then 2 and 10/0.

To tune in a non-preset radio station

•In step 2, press TUNING MODE on the remote repeatedly until “MANUAL” appears in the display, and then press TUNING + or

– repeatedly to tune in the desired station (Manual Tuning).

•In step 2, press TUNING MODE on the remote repeatedly until “AUTO” appears in the display, and then press TUNING + or –. The frequency indication changes and the scanning stops when the system tunes in a station (Automatic Tuning).

To cancel Automatic Tuning

Press TUNING MODE on the remote.

Tips

•If there is static during an FM broadcast, press FM MODE on the remote repeatedly until “MONO” appears in the display. The broadcast will no longer be in stereo, but the reception will improve.

•To improve the reception, adjust the supplied antennas or connect an external antenna.

Tuner

43