“GROUP” lights up.
3 Press GROUP SKIP repeatedly to select the group to be labeled.
4 Press NAME EDIT/ SELECT on the remote.
The first character of the group starts flashing.
5 Follow the same procedures as from step 3 to 6 in “Labeling an MD” on page 29.
Note
Use of the characters “//” in a disc name may prevent the Group function from operating.
continued
Press MENU/NO on the remote in stop mode.
Labeling a group
— Name Function
Labeling a group
You can enter a total of approximately 1,700 characters for the disc title, track titles and group titles on a single MD.
1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.
2 Press GROUP ON/OFF on the remote in stop mode.

Checking the titles

To check the disc titles, press SCROLL on the remote in stop mode. To check the track title, press SCROLL on the remote during play. The title appears scrolling in the display. To stop scrolling, press SCROLL on the remote. Press the button again to resume scrolling.

Erasing the titles

1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.

2

3 Press .or >repeatedly until “Nm Erase?” appears, and then press ENTER/YES on the remote.

4 Press .or >repeatedly until the track number of the track title you want to erase appears (or “Disc” when you want to erase the disc title). Then press ENTER/YES on the remote.

Note

Use of the characters “//” in a disc name may prevent the Group function from operating.

— MD Editing

31