Programing the CD tracks
— Program Play
You can make a program of up to 25 tracks on a CD in any order that you want.
1 Press FUNCTION repeatedly until “CD” appears in the display.
2 Press PLAY MODE on the remote in stop mode repeatedly until “PROGRAM” appears in the display.
3 Press .or >repeatedly until the desired track number appears in the display.
Selected track | Playing time of the |
number | selected track |
4 Press ENTER/YES on the remote.
The track is programed.
“Step” appears, followed by the order number of the track just programed. Then the number of the last programed track appears, followed by the total playing time of the program. If you have made a mistake, you can clear the last programed track from the program by pressing CLEAR on the remote.
Last programed Total playing time track number
5 To program additional tracks, repeat steps 3 and 4.
6 Press u(or CD Non the remote).
To | Do this |
Check the program | Press .or > |
order | repeatedly during Program |
| Play. |
|
|
Check the total | Press TIME on the remote in |
number of programed | stop mode. The total number |
tracks | of programed steps appears, |
| and then the last programed |
| track number and the total |
| playing time of the program. |
|
|
Cancel Program Play | Press x, and then press |
| PLAY MODE on the remote |
| repeatedly until |
| “PROGRAM” and “SHUF” |
| disappear from the display. |
|
|
Add a track to the end | Do steps 3 and 4 with |
of the program | Program Play stopped. |
|
|
Erase the last | Press CLEAR on the remote |
programed track | in stop mode. Each time you |
| press the button, the last |
| programed track is erased. |
|
|
Program the desired | Press number buttons instead |
track using the | of performing steps 3 to 5. |
number buttons on | For details on using the |
the remote | number buttons, see page 10. |
|
|
Tips
•The program you made remains after Program Play finishes. To play the program again, switch the function to CD, and then press u(or CD Non the remote).
•
CD
11