Programing the MD tracks
— Program Play
You can make a program of up to 25 tracks on an MD in any order that you want.
1 Press FUNCTION repeatedly until “MD” appears in the display.
5 To program additional tracks, repeat steps 3 and 4.
6 Press u(or MD Non the remote).
To | Do this |
Check the program | Press .or > |
order | repeatedly during Program |
| Play. |
2 Press PLAY MODE on the remote in stop mode repeatedly until “PROGRAM” appears in the display.
3 Press .or >repeatedly until the desired track number appears in the display.
Selected track | Playing time of the |
number | selected track |
4 Press ENTER/YES on the remote.
The track is programed.
Check the total number of programed tracks
Cancel Program Play
Add a track to the end of the program
Erase the last programed track
Press TIME on the remote in stop mode. The total number of programed steps appears, and then the last programed track number and the total playing time of the program.
Press x, and then press PLAY MODE on the remote repeatedly until “PROGRAM” and “SHUF” disappear from the display.
Do steps 3 and 4 with Program Play stopped.
Press CLEAR on the remote in stop mode. Each time you press the button, the last programed track is erased.
“Step” appears, followed by the order number of the track just programed. Then the number of the last programed track appears, followed by the total playing time of the program. If you have made a mistake, you can clear the last programed track from the program by pressing CLEAR on the remote.
Last programed Total playing time track number
Program the desired | Press number buttons instead |
track using the | of performing steps 3 to 5. |
number buttons on | For details on using number |
the remote | buttons, see page 15. |
|
|
Tips
•The program you made remains after Program Play finishes. To play the same program again, switch the function to MD, and press u(or MD Non the remote).
•
16