Recording CD tracks on an MD as group tracks (continued)
Recording into a new group
You can create new groups by CD album or artist, etc.
1 Do steps 1 to 3 of “Recording a CD on an MD” on page 19.
2 Do steps 2 to 5 in “Programming the CD tracks” on page 11.
3 Press GROUP ON/OFF on the remote.
“GROUP” lights up.
Press TIME to display the remaining recordable time.
4 Press REC/REC IT.
“New Group” flashes and the deck changes to recording pause.
5 Press u.
To continue and record into another new group, press x repeatedly after the recording to display the disc name and the total number of groups, then do steps 4 and 5.
If “Group Full” appears when you press REC/REC IT in step 4
You cannot start recording because there is insufficient character space for group management.
Delete the unnecessary characters (disc name or track names) until group recording is possible (see page 31).
Notes
•The new group is added after any existing groups with tracks registered into them.
•Up to 99 groups can be registered on a single MD.
•If “Group Full” appears while recording, track numbers are not marked.
Recording into an existing group
1 Do steps 1 to 3 of “Recording a CD on an MD” on page 19.
2 Do steps 2 to 5 in “Programming the CD tracks” on page 11.
3 Press GROUP SKIP on the remote repeatedly until the group you want to record in appears.
4 Press REC/REC IT.
“New Track” flashes and the deck changes to recording pause.
5 Press u.
If “Group Full” appears when you press REC/REC IT in step 4
You cannot start recording because there is insufficient character space for group management.
Delete the unnecessary characters (disc name or track names) until group recording is possible (see page 31).
Notes
•The recorded tracks is added to the end of the group.
•When you newly record a track into an existing group, the track numbers following the newly recorded track may change when the Group function is turned off.
•If “Group Full” appears while recording, track numbers are not marked.
28