4 Press .or >repeatedly until the first track number of the two to be combined appears, and then press ENTER/YES on the remote.
For example, to combine track 1 to 4, select 4.
5 Press .or >repeatedly until the second track number of the two to be combined appears.
Second track number New track number to be combined
6 Press ENTER/YES on the remote.
“Complete!” appears.
Notes
•Tracks recorded in different recording modes (STEREO, LP2, LP4 or MONO) cannot be combined.
•If both of the combined tracks have track titles, the title of the second track is erased.
•If two tracks registered to different groups are combined, the second track is registered to the group in which the first track is registered. (The status of the second track is determined by the status of the first track.).
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit and restore the contents of the MD to the condition before the edit.
Note, however, that you cannot undo an edit if you do any of the following after the edit:
•Do another edit.
•Start recording.
•Update the TOC by turning off the system or ejecting the MD.
•Disconnect the power cord.
You cannot undo the S.F Edit Function even if you use the Undo Function.
1 Press FUNCTION on the remote repeatedly until “MD” appears in the display.
2 Press MENU/NO on the remote in stop mode to display “Edit Menu.”
3 Press .or >repeatedly until “Undo?” appears in the display.
“Undo?” does not appear, when there is no editing function that can be canceled.
4 Press ENTER/YES on the remote.
A message appears, depending on the last edit.
5 Press ENTER/YES on the remote again.
“Complete!” appears.
— MD Editing
39