7Press V/v repeatedly to select “ON,”

then press .

The Control for HDMI function of the receiver is activated.

8Press GUI MODE to exit the GUI menu.

If the GUI menu is displayed, the Control for HDMI function of the playback components will not work properly.

9Press one of the HDMI input buttons to display the image of the playback components for which you want to set the Control for HDMI function.

10Turn the Control for HDMI function of the connected component on.

For details on setting the connected component, refer to its operating instructions.

11Repeat steps 9 and 10 to set the Control for HDMI function and to display the image of all the playback components you want to use.

Playing back components with one-touch operation (One-Touch Play)

By a simple operation (one-touch), components connected to the receiver with HDMI connections start automatically. You can enjoy the sound/image using connected components.

Play back a connected component.

The receiver and TV are turned on simultaneously, and sound and image are output from the receiver and TV.

To use the One Touch Play of the camcorder

1Turn the Control for HDMI function on for both the receiver and your camcorder.

2Connect your camcorder to the HDMI IN 6 jack (page 34).

The receiver and TV are turned on simultaneously, and sound and image are output from the receiver and TV.

Note

•Connect your camcorder to the HDMI IN 6 jack. The camcorder may not work correctly if you connect it to the HDMI IN jack on the rear panel.

•Depending on the TV, the start of the content may not be output.

Enjoying the TV sound from the speakers connected to the receiver (System Audio Control)

You can enjoy the TV sound from the speakers connected to the receiver by a simple operation.

Depending on the TV settings, while you are watching the TV, the receiver turns on and switches to the “TV” function automatically. TV sound is output from the speakers connected to the receiver, and the volume of the TV is minimized simultaneously.

You can use the System Audio Control function as follows.

•The sound of the TV is output from the speakers connected to the receiver when you turn the receiver on while the sound is being output from the TV speaker.

•You can adjust the receiver’s volume when you adjust the TV volume.

You can also operate this function using the TV menu. For details, see the operating instructions of the TV.

Notes

•When “Control for HDMI” is set to “ON,” the “Audio Out” settings in the HDMI settings menu will set automatically depending on the System Audio Control settings.

•When you connect a TV that does not have System Audio Control function, the System Audio Control function does not work.

•If the TV is turned on before turning on the receiver, the TV sound will not be output for a moment.

100GB