6:Preparing the receiver and the remoteConnecting the AC power cord (mains lead)

Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver, then connect the AC power cord (mains lead) to a wall outlet.

Notes

•Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals.

•Connect the AC power cord (mains lead) firmly.

AC IN terminal

To the wall outlet

AC OUTLET

AC power cord (mains lead) (supplied)

A several space is left between the plug and the rear panel even when the power cord (mains lead) is inserted firmly. The cord is supposed be connected this way. This is not malfunction.

Notes

•The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on.

•Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet. This may cause a malfunction.

Performing initial setup operations

Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.

POWER

 

 

 

TONE MODE

HDMI IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press POWER to turn off the receiver.

2 Hold down POWER while pressing TONE MODE and HDMI IN to turn on the receiver.

3 Release the TONE MODE and HDMI IN after a few seconds.

After “MEMORY CLEARING...” appears on the display for a while, “MEMORY CLEARED.” appears.

All the settings you have changed or adjusted are reset to the initial settings.

44GB