4 Press V/v to select “Direct
Tuning,” then press .
5 Press SHIFT, then press the numeric buttons to enter the frequency, then press .
The menu is displayed on the TV screen.
Press MENU.
2
3 Press V/v repeatedly to select “ FM” or “ AM,” then press or b.
Press AMP.
The receiver can be operated using the remote.
1
Tuning into a station directly (Direct Tuning)
Enter the frequency of a station directly by using the numeric buttons.

Example 1: FM 102.50 MHz

Select 1 b 0 b 2 b 5

Example 2: AM 1,350 kHz

Select 1 b 3 b 5 b 0

Tip

If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.

If you cannot tune in a station

“– – – .– – MHz” appears and then the display returns to the current frequency.

Make sure you have entered the right frequency. If not, repeat step 5. If you still cannot tune in a station, the frequency is not used in your area.

Changing the AM tuning scale

You can change the AM tuning scale to either 9 kHz or 10 kHz on the receiver.

POWER

TUNING MODE

1 Press POWER to turn off the receiver.

2 While holding down TUNING MODE, press POWER on the receiver.

3 Change the current AM tuning scale to 9 kHz (or 10 kHz).

To reset the scale to 10 kHz (or 9 kHz), repeat the procedure above.

Note

All preset stations will be erased when you change the tuning scale.

66GB