Multi Zone settings
You can make settings for the main zone, zone 2 or zone 3.
Multi Zone SetupTurning the power on or off for zone 2/zone 3
You can turn zone 2 or zone 3 operation on or off. “Main” (this receiver) is always selected. You cannot turn it off.
1Press V/v to select the zone you want to turn on or off, then press .
2Press V/v to select “ON” or “OFF,” then press .
xON
xOFF
Selecting the output source for each zone
You can select the source that is output to the zone. Audio and video signals are output to zone 2, while only audio signals are output to zone 3.
1Press V/v to select the zone to which
you want to output audio/video signals, then press .
2Press B/b to select “Input,” then press
.
3Press V/v to select the input, then press .
Adjusting the volume for zone 2/zone 3
You can adjust the volume in the main zone. If “Sur Back Assign” is set to “ZONE2” in the Speaker settings menu, you can also adjust the volume of zone 2.
1Press V/v to select the zone for which
you want to adjust the volume, then press .
2Press B/b to select “Volume,” then press .
3Press V/v to adjust the volume, then press .
Selecting the criteria for output of signals to control each zone
You can turn the receiver on or off in another zone, or select various options for use of the 12V Trigger function.
1Press V/v to select the zone you want, then press .
2Press B/b to select “12V Trigger,” then press .
3Press V/v to select the parameter, then press .
xOFF
Lets you turn off output of 12V triggers even when the main receiver is turned on.
xCTRL
Lets you turn the output of 12V triggers on or off manually using the CIS command of the IR remote.
xZONE
Lets you turn the output of 12V triggers on or off based on whether the selected zone is turned on or off.
xINPUT (for “Main” only)
Lets you turn on the output of 12V triggers when the preset input is selected.
When you select “Input,” the setting display which sets each input trigger to on/off appears.
120GB