114GB
Press RETURN/EXIT O.
3
The Speaker Pattern screen appears.
2 Press V/v to select the speaker pattern you want, then press .
“Speaker Pattern,” then press
.
Speaker settings
You can adjust each speaker manually. You can also adjust the speaker levels after the auto calibration is completed.
Note
The Speaker settings are only for the current “Seating Position.”
Impedance
You can set the speaker impedance. For details, see “8: Setting the speakers” (page 46).
x 4 Ω x 8 Ω
Speaker Pattern
Select “Speaker Pattern” according to the speaker system which you are using. You do not need to select the speaker pattern after auto calibration.
To select the speaker pattern 1 Press V/v repeatedly to select
Center Mix

You can set the analog downmix settings on or off.

xOFF

If there is a center speaker connected, this setting is set to “OFF” automatically.

xON

We recommend you set “Center Mix” to “ON” to enjoy digital audio with high quality sound when you do not have a center speaker connected. Analog downmix works when you set “Center Mix” to “ON.” This setting is also effective to input signals from the MULTI CHANNEL INPUT jacks.

Sur Back Assign

You can make settings for the surround back speaker(s).

xOFF

If you have not connected surround back speakers, select “OFF.”

xBI-AMP

If you connect front speakers in a bi-amplifier configuration, select “BI-AMP” (page 109).

xZONE2

If you are using the surround back speakers in zone 2, select “ZONE2.” When you select “ZONE2,” the input to the SUR BACK jacks of the MULTI CHANNEL INPUT is invalid (page 93).

Note

Set “Sur Back Assign” to “OFF,” then connect the surround back speakers to this receiver when you want to change the connection from a bi-amplifier connection or a zone 2 connection to a surround back speakers connection. Re-set up the speakers after you connect the surround back speakers. Refer to “Auto Calibration” (page 48) or “Manual Setup” (page 115).