You can select the decoding mode for the sound field.
For details on the decoding modes available, see “Setting a
xPLII
Performs Dolby Pro Logic II decoding. A source recorded in 2 channel format is decoded into 5.1 channels.
xPLIIx
Performs Dolby Pro Logic IIx decoding. A source recorded in 2 channel or 5.1 channel format is decoded into 7.1 channels.
xNeo:6 Cinema
Performs DTS Neo:6 Cinema mode decoding. A source recorded in 2 channel format is decoded into 7 channels.
xNeo:6 Music
Performs DTS Neo:6 Music mode decoding. A source recorded in 2 channel format is decoded into 7 channels. This setting is ideal for normal stereo sources such as CDs.
x
Next generation of
Note
You can select “PLII” when there is no surround back speaker on the Speaker Pattern menu, or you can select “PLIIx” when there is a surround back speaker. You cannot select both settings at the same time.
EQ settings
You can use following parameters to adjust the tonal quality (bass/treble level) of front, center and surround back speakers.
BassTreble
Level (dB)
Frequency (Hz)
Notes
•This function does not work in the following cases.
–The
–Sound Field is set to “2ch Analog Direct.”
•This function does not work when Dolby TrueHD signals with a sampling frequency of higher than 96 kHz are being received.
•If the equalizer is adjusted while the receiver is receiving signals with a sampling frequency of higher than 96 kHz, the signals will always be played back at either 44.1 kHz or 48 kHz.
To adjust the equalizer on the EQ screen
1Press B/b to select the speaker on the
screen you want to adjust, then press
.
2Press B/b to select “Bass” or “Treble.”
3Press V/v to adjust the gain, then press
.
Settings Adjusting
119GB