Tips
• Even when this receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the main remote at the same time (SYSTEM STANDBY).
• Only signals from components connected to the analog input jacks are output through the ZONE 2 or ZONE 3 jacks. No signals are output from components connected to only the digital input jacks.
• When SOURCE is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the ZONE 2 OUT or ZONE 3 OUT jacks even when the multi-channel input is selected. The analog audio signals of the current function are output.
96GB
after pressing ZONE.
Press ?/1
To finish the zone 3 operation
Adjust to a suitable volume using the receiver in zone 3.
5
For zone 3, only analog audio signals are output. When you select SOURCE, the signals of the current input are output.
The zone function is activated.
Press ?/1.
3
4 Press one of the input buttons
on the remote to select the source signals you want to output.
Press ZONE.
The remote switches to zone 3. Change the zone setting of the remote to zone 3 in advance (page 94).
2
Operating the receiver from zone 3
1 Turn on the main receiver (this receiver) and the amplifier in zone 3.
Listening to the same music in different zone(Party Mode)

You can enjoy listening to the same music in different zone.

AMP

B,

PARTY

1

2

3

Start playback in the main zone.

Press AMP.

Press PARTY.

The party mode screen appears on the TV screen.