•The measurement result is not utilized in the following cases.

–The multi-channel input is selected. –“2ch Analog Direct” is being used.

•The measurement result is not utilized when Dolby TrueHD signals with a sampling frequency of higher than 96 kHz are being received.

AMP

V/v/B/b,

MENU

1 Press AMP.

The receiver can be operated using the remote.

2 Press MENU.

The menu is displayed on the TV screen.

3 Press V/v repeatedly to select “Settings,” then press or

b.

The Settings menu list appears on the TV screen.

4 Press V/v repeatedly to select “Auto Calibration,” then press or b.

5 Press V/v repeatedly to select “Quick Setup,” then press .

The screen on which you can select the item to be measured appears.

50GB