The remote commanders are initially set to be used in zone 2. If you want to use them in zone 3, switch the zone setting of the remote.
Main remote
| ?/1 |
RM SET |
|
UP | AMP |
SHIFT | ZONE |
| |
| 2, 3 |
| ENT/ |
| MEM |
Zone 2/Zone 3 remote
RM SET |
|
UP | ?/1 |
| |
SHIFT |
|
| 2, 3 |
ENTER
On the main remote commander
1Press ?/1 while pressing RM SET UP.
The AMP and ZONE buttons flash.
2Press ZONE.
The AMP button goes off, the ZONE button keeps flashing and the SHIFT button lights up.
94GB
3Press the numeric button 2 for the zone 2, or 3 for the zone 3 while the ZONE button is flashing.
The ZONE button lights up.
4Press ENT/MEM.
The ZONE button flashes twice and the remote switches to zone 2 or zone 3 mode.
On the zone 2/zone 3 remote commander
1Press ?/1 while pressing RM SET UP.
The RM SET UP button flashes and the SHIFT button lights up.
2Press the numeric button 2 for the zone 2, or 3 for the zone 3 while the RM SET UP button is flashing.
The RM SET UP button lights up.
3Press ENTER.
The RM SET UP button flashes twice and the remote switches to zone 2 or zone 3 mode.