3Press V/v to select “ Settings,” then

press or b.

4Press V/v to select “Speaker,” then

press or b.

5Press V/v to select “Speaker Pattern,” then press .

6Press V/v to select the appropriate speaker pattern so that there are no surround back speakers.

7Press RETURN/EXIT O.

8Press V/v to select “Sur Back Assign,” then press .

9Press V/v to select “BI-AMP,” then

press .

The same signals output from the FRONT SPEAKERS A terminals can be output from the SURROUND BACK SPEAKERS terminals.

Notes

•You cannot use the FRONT SPEAKERS B terminals for a bi-amplifier connection.

•When you use the auto calibration function, make the bi-amplifier settings before you perform auto calibration.

•If you make the bi-amplifier settings, the speaker level, balance, and equalizer settings of the surround back speakers become invalid, and those of the front speakers are used.

•Signals output from the PRE OUT jacks are used with the same settings as those of the SPEAKERS terminals.

•If the Speaker Pattern is set to the setting that there are surround back speakers, you cannot make the bi-amplifier settings.

110GB