Turn on the main receiver (this receiver).
Operating the receiver from another zone(ZONE 2/ZONE 3 operations)

The following operations are described for connecting an IR repeater and operating the receiver in zone 2 or zone 3. When an IR repeater is not connected, use this receiver in the main zone.

?/1

ZONE

Input buttons

V/v/b,

MENU

MASTER

VOL

Operating the receiver from zone 2

1

2 In the case of illustration 1-2

(page 89), turn on the amplifier in zone 2.

3

Press ZONE.

 

 

The remote switches to zone 2.

4

Press ?/1.

 

 

The zone function is activated.

5

Press MENU.

 

 

The menu is displayed on the TV screen.

6

Press V/v to select “ Input,”

 

then press

or b.

7

Press V/v to select the input

 

source you want, then press

 

.

 

For zone 2, analog video and audio signals are output. When you select SOURCE, the signals of the current input of the main zone are output to the ZONE 2 OUT jack.

8 Adjust to a suitable volume.

•In the case of illustration 1-1(page 89), adjust the volume using MASTER VOL +/– on the remote.

•In the case of illustration 1-2

(page 89), adjust the volume using the receiver in zone 2.

To finish the zone 2 operation

Press ?/1 after pressing ZONE.

Features zone-Multi Using

95GB