Notes
•It takes some time to output the sound after a playback operation is performed on the connected component (e.g., pressing the PLAY button, pressing the STOP button, pressing the PAUSE button) due to limitations of the H.A.T.S. system. The time lag depends on the sound source. This feature may be ineffective depending on the component and the sound source, even if you set it to ON.
•The components connected to the HDMI jack must support the H.A.T.S. feature.
•When “Audio Out” is set to “TV+AMP,” the H.A.T.S. function may not work depending on the component connected or the condition of that component. In this case, select “AMP” for “Audio Out.”
•The H.A.T.S. function of this receiver works when a Sony
Stream information about the H.A.T.S. function available
Audio signal input Sampling frequency
Linear PCM 2ch | 44.1 kHz, 48 kHz, |
| 88.2 kHz, 96 kHz, |
| 176.4 kHz, 192 kHz |
|
|
Linear PCM Multi | 44.1 kHz, 48 kHz, |
| 88.2 kHz, 96 kHz, |
| 176.4 kHz, 192 kHz |
|
|
DSD | 2.8224 MHz |
|
|
Lets you output the video input signals from the HDMI IN jack directly to the HDMI OUT jack.
xOFF
The input signals from the HDMI IN jack are output through a video processor.
xON
The input signals from the HDMI IN jack are output directly.
Network Settings
Makes the settings for the network. Refer to “Using Network Features” supplied with these operating instructions for details.
Server Function SetupLets you activate the server function of the receiver.
xOFF
xON
Network SetupLets you make the network settings.
xNetwork Information
xNetwork Setup
xProxy Setup
xCancel Network Setup
Rhapsody AccountLets you enter the Rhapsody Account number to listen to the Rhapsody Internet radio service.
Settings Adjusting
127GB