Connecting components with digital audio input/output jacks

The following illustration shows how to connect a Super Audio CD player, CD player, an MD deck and DIGITAL MEDIA PORT adapter.

Super Audio CD

 

MD deck

 

DIGITAL MEDIA PORT

player, CD player

 

 

 

 

 

 

 

 

 

adapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Started Getting

AB

ACoaxial digital cord (not supplied) BOptical digital cord (not supplied)

Notes

Tip

• When connecting optical digital cords, insert the

All the digital audio jacks are compatible with

plugs straight in until they click into place.

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

• Do not bend or tie optical digital cords.

sampling frequencies.

Before connecting cords, make sure to disconnect the AC power cord (mains lead).

To disconnect the DIGITAL MEDIA PORT adapter, observe the following precautions.

Remove the DIGITAL MEDIA PORT adapter after removing the cord when cords are connected to the COMPONENT VIDEO jack.

Remove the DIGITAL MEDIA PORT adapter by squeezing the sides of the connector, since the connector is locked in place.

continued

29GB