You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate.
Main remote commander
The
Name Function
AAV ?/1 (on/ Press to turn on or off the audio/
standby) video components that the remote is assigned to operate
If you press ?/1 (2) button at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY).
Note
The function of the AV ?/1 switch changes automatically
each time you press the input button (5).
B ?/1 (on/ | Press to turn the receiver on or |
standby) | off. |
| If zone 2 or zone 3 is selected, |
| only the main receiver is turned |
| on or off with this button. To |
| turn off all components |
| including an amplifier in zone 2 |
| or zone 3, press ?/1 and AV ?/ |
| 1 (1) at the same time |
| (SYSTEM STANDBY). |
| Saving the power in |
| standby mode. |
| When “Control for HDMI” |
| (page 126) and |
| Control” (page 128) are set to |
| “OFF.” |
|
|
C ZONE | Press to switch the zone 2 or |
| zone 3 operation (page 88). |
|
|
D AMP | Press to enable the receiver |
| operation (page 45). |
|
|
E Input | Press one of the buttons to |
buttons | select the component you want |
| to use. When you press any of |
| the input buttons, the receiver |
| turns on. The buttons are |
| factory assigned to control Sony |
| components (page 58). You can |
| program the remote to control |
| |
| following the steps in |
| |
|
FTV INPUT Press TV (wf), then press TV INPUT to select the input signal of a TV.
G WIDE | Press TV (wf), then press |
| |
| WIDE repeatedly to select the |
| |
| wide picture mode. |
| |
|
|
|
|
| continued |
|
|
|
|
|
17GB