Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 120 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode1) 2)
(8 ohms 20 Hz – 20 kHz, THD 0.09%):
130 W + 130 W
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz, THD 0.15%):
130 W + 130 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7%) FRONT2):
140 W + 140 W CENTER2): 140 W SURROUND2):
140 W + 140 W SURROUND BACK2):
140 W + 140 W
Reference Power Output
(4 ohms 1 kHz, THD 0.7%) FRONT2):
130 W + 130 W CENTER2): 130 W SURROUND2):
130 W + 130 W SURROUND BACK2):
130 W + 130 W
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions: Power requirements: 120 V AC, 60 Hz
Frequency response
PHONO | RIAA equalization |
| curve ± 0.5 dB |
|
|
MULTI CHANNEL | 10 Hz – 100 kHz |
INPUT, | ± 3 dB |
TAPE, MD, TV, |
|
VIDEO 1/2, BD, DVD, |
|
SAT |
|
|
|
Inputs (Analog)
PHONO | Sensitivity: 2.5 mV |
| Impedance: 50 kohms |
| S/N: 90 dB (A, 20 kHz |
| LPF) |
|
|
MULTI CHANNEL | Sensitivity: 150 mV |
INPUT, | Impedance: 50 kohms |
TAPE, MD, TV, | S/N: 100 dB (A, |
VIDEO 1/2, BD, DVD, | 20 kHz LPF) |
SAT |
|
|
|
Inputs (Digital)
BD, DVD, | Impedance: 75 ohms |
S/N: 96 dB (A, 20 kHz | |
| LPF) |
|
|
VIDEO 1/2, TV, SAT, | S/N: 96 dB |
TAPE, MD (Optical) | (A, 20 kHz LPF) |
|
|
Outputs
TAPE (REC OUT), | Voltage:150 mV |
MD (REC OUT), | Impedance: 1 kohm |
VIDEO 1, ZONE 2, |
|
ZONE 3 (AUDIO OUT) |
|
|
|
FRONT L/R, CENTER, | Voltage: 2 V |
SURROUND L/R, | Impedance: 1 kohm |
SURROUND BACK L/R, |
|
SUBWOOFER |
|
|
|
FM tuner section
Tuning range | 87.5 – 108.0 MHz |
Antenna (aerial) | FM wire antenna (aerial) |
Antenna (aerial) terminals
75 ohms, unbalanced
continued
Information Additional
171GB