On the PVE-500, press the A/B button, turning it on.

Editing From Control 5 Chapter Units Control

Control From the PVE-500

Procedure

To perform A/B roll editing by controlling the DFS-700/700P from the

PVE-500, use the following procedure.

Read this in conjunction with the PVE-500 Operating Instructions.

1

2 On the PVE-500, select the FROM source and TO source.

The FROM source corresponds to the background on the DFS-700/ 700P, and the TO source corresponds to the foreground.

3 Set the IN and OUT points for the FROM source, the TO source, and the recorder, in any order.

Note

Because the DFS-700/700P has a built-in frame synchronizer, output of player VCR edit points set on the PVE-500 is delayed by 1 frame, so that recording begins with the previous frame. However, recorder edit points are not delayed.

4 On the PVE-500, press the TRANS button, turning it on, and set the transition duration.

5 On the DFS-700/700P, select the effect and make other settings as required.

Note that the transition duration set on the PVE-500 takes priority.

6 Conduct a preview as required and execute the edit.

The edit is recorded as shown below.

 

Recorder and FROM

FROM source OUT point

 

Recorder and TO

 

source IN points

TO source IN point

 

source OUT points

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recorder video

 

 

Player A video

 

Player B video

 

Recorder video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transition duration

5-4Chapter 5 Control From Editing Control Units