4CCR, LIGHTING, and MATTES buttons CCR (color corrector) button: Press this button to
use the color corrector. When you press this button, it lights, and you can adjust the color corrector settings in the effect control section. Press the button once more to turn it off and exit the color corrector.
LIGHTING button: Press this button to apply lighting effects to the foreground image. When you press this button, it lights, and you can adjust the lighting settings in the effect control section. Press the button once more to turn it off and remove the lighting effect.
MATTES button: By pressing this button, you can carry out various matte adjustments, matte copies, and internal video signal selections in the effect control section.
5SHIFT button
When a button in the menu control section is lit, but the corresponding menu is not displayed in the effect control section, hold down the SHIFT button and press the lit button. This brings up the menu, without interrupting the function selection, and leaving the button lit.
This applies to the following buttons:
•MASK buttons in the TITLE section
•BORDER and MASK buttons in the DSK section
•TRAIL SHADOW, BEVELD EDGE, SOFT, and BORDER buttons in the EDGE section
•CCR button and LIGHTING button
6SET UP button
To access the setup menus for system and control panel settings, press this button. The setup menu appears in the effect control section.
of Function and Location 2 Chapter Controls and Parts
Chapter 2 Location and Function of Parts and Controls |