Operations Advanced 4 Chapter
2 Use buttons 0 to 9 to enter the pattern number you want to assign to a button.
For more information about pattern numbers, see the section “Effect Pattern
Image List” (page
The number you enter appears in the PATTERN NUMBER display window.
3 Press the ENTER button.
4 While holding down the DIRECT PATTERN button, press the button (0 to 9, or P IN P/RST) to which you want to assign the pattern.
The button you pressed lights, and the pattern number entered in step 2 is assigned to the button.
To restore the default assignments (direct pattern reinitialization)
After changing pattern assignments, you can restore the factory default assignments shown in “Example Effects” (page
To return all of the buttons 0 to 9 and P IN P/RST to their factory default assignments, use the following procedure.
1 Press the SET UP button.
The setup menu appears.
2 Press the PAGE button to display page 6/8.
3 Press the F4(KEYPAD) button to set it to “ON”. 4 Press the F5(EXEC) button.
5 Press the F3(OK) button.
This returns all of the assignments to the 0 to 9 and P IN P/RST buttons to their factory default settings.