Operation Basic 3 Chapter
DME Switcher Introduction
5 Press button 9 in the pattern/numeric keypad.
|
| The button lights, and this selects the wipe assigned to this button |
|
| (pattern number 24). The PATTERN NUMBER display window |
|
| shows “0024”. |
<Transition time setting> | 6 Press the SET button once or twice, so that the EFFECT display | |
|
| window mode indicator lights. |
|
| (If it is already lit, omit this step.) |
| 7 In the pattern/numeric keypad, press buttons 3 and 0 in that order. | |
|
| The TRANS RATE display window shows “.3.0.”. |
|
|
|
|
| Dots appear to |
|
| the lower right of |
|
| the digits |
|
|
|
8 Press the ENTER button.
The dots to the lower right of the digits disappear, and the value entered in step 7 is set as the transition time.
9 Press the EFFECT button, turning it on. (If it is already lit, omit this step.)
10Press the AUTO TRANS button.
The wipe is carried out over 30 frames, switching from the background image to the foreground image.
When the transition completes, BACKGROUND bus button 2 is lit red, and FOREGROUND bus button 1 is lit amber. This indicates that as a result of the transition, the video signal connected to the VIDEO INPUT 2 connector is automatically selected as the background image, and the video signal connected to the VIDEO INPUT 1 connector as the foreground image.