To blur the image boundary
Use the following procedure.
1 Press the SOFT button in the EDGE section, turning it on, and display page 1 of the EDGE menu.
EDGE | Border | Soft | BvlWid | BVLTYP | BvlInt |
|
|
|
|
|
|
1/2 | |||||
PAGE | F1 | F2 | F3 | F4 | F5 |
2 Turn the F2(Soft) knob, to set the degree of boundary blurring.
To apply a beveled edge to the image boundary
Use the following procedure.
1 Press the BEVELD EDGE button in the EDGE section, turning it on, and display page 1 of the EDGE menu.
EDGE | Border | Soft | BvlWid | BVLTYP | BvlInt |
|
|
|
|
|
|
1/2 | |||||
PAGE | F1 | F2 | F3 | F4 | F5 |
2 Turn knobs F3(BvlWid), F4(BVLTYP), and F5(BvlInt) to set the width, type, and contrast of the beveled edge.
To remove unwanted portions of the image
Use the following procedure.
1 Press any one of the BORDER, SOFT, and BEVELD EDGE buttons, turning it on, and display page 2 of the EDGE menu. (Press the PAGE button to change the page.)
EDGE | CROP | Left | Right | Top | Bottom |
|
|
|
|
|
|
2/2 | AUTO | ||||
|
|
|
|
|
|
PAGE | F1 | F2 | F3 | F4 | F5 |
2 To adjust the image boundary manually, press the F1(CROP) button to select “MANUAL”.
3 Turn the F2(Left), F3(Right), F4(Top), F5(Bottom) knobs, to adjust the four sides of the image boundary.
Note
If in step 2 you set F1(CROP) to “AUTO”, the automatic adjustment for the particular effect pattern is carried out. Selecting “OFF” disables the cropping.
When effect parameters are already adjusted
When parameters of a border, soft edge, beveled edge, or crop effect are already adjusted, simply pressing any one of the BORDER, SOFT, and BEVELD EDGE buttons in the EDGE section to turn it on allows you to apply the selected effects to the effect pattern.
Operation Basic 3 Chapter
Chapter 3 Basic Operation