9N/R (normal/reverse) button
To carry out an effect in normal/reverse (i.e. alternating) mode, press this button, turning it on. It lights automatically for animation effects and title keys.
q; REV (reverse) button
To carry out an effect in the reverse direction, press this button, turning it on.
For an effect for which normal/reverse (alternating) operation is possible, once the effect is carried out, the direction is automatically reversed. After an effect is carried out in the normal (i.e. forward) direction, this button lights. After an effect is carried out in the reverse direction, this button goes off.
qa Fader lever
Move this to carry out an effect transition manually.
Note
After powering the system on, move the fader lever to the end of its travel once in each direction. This ensures that the fader lever will function correctly.
qs Fader lever stiffness adjusting screw
Turn this screw with a miniature Phillips screwdriver to adjust the fader lever stiffness. Turn clockwise to make the fader lever harder to move, and counterclockwise to make it easier to move.
qd Transition indicator
This indicator consisting of 20 LEDs shows the progress of an effect transition.
4Pattern/numeric keypad
This is used for effect pattern selection, transition time setting, and other data entry.
1PATTERN NUMBER display window
PATTERN NUMBER |
|
|
| 2 SET |
|
|
| SET | button |
3 DIRECT RECALL button |
|
| 4 DIRECT | |
|
| DIRECT | DIRECT | PATTERN |
|
| RECALL PATTERN | button | |
|
|
| LAST X |
|
7 | 8 | 9 | INS |
|
4 | 5 | 6 | DEL | 5 PATTERN/ |
|
|
| P IN P | |
1 | 2 | 3 | KEY PAD | |
RST | buttons | |||
DOWN UP ENTER
0
PATTERN/KEY PAD
1PATTERN NUMBER display window This shows an effect pattern number.
While you are entering a pattern number, the dot at the lower right of each numeral lights.
2SET button
Press this button, turning it on, to enter the pattern number specification mode. In this mode, you can use the PATTERN/KEY PAD buttons to specify an effect pattern number.
Press this button once more, turning it off, to return to the direct pattern selection mode.
3DIRECT RECALL button
Press this button, turning it on, to enter the direct recall mode. In this mode, pressing one of the PATTERN/ KEY PAD buttons 0 to 9 recalls the corresponding snapshot 0 to 9.
4DIRECT PATTERN button
Press this button, turning it on, to enter the direct pattern selection mode. In this mode, you can use the PATTERN/KEY PAD buttons (0 to 9 and P IN P/ RST) to directly select the assigned effect patterns. When the system is powered on, and after exiting any other operating mode, it automatically switches to direct pattern selection mode.
of Function and Location 2 Chapter Controls and Parts
Chapter 2 Location and Function of Parts and Controls |