Appendixes
SpecifiSpecificationsations
General
Signaling system
Power requirements
Operating voltage
Power consumption
200W
Peak inrush current
(1)Power ON, current probe method: 24 A (240 V)
(2)Hot switching inrush current, measured in accordance with European standard
Operating temperature
| 0°C to 40°C (32°F to 104°F) |
Dimensions | Control panel: 440 ⋅ 121 ⋅ 287 mm |
| (w/h/d) (173/8 ⋅ 47/8 ⋅ 113/8 |
| inches) |
| Processor: 440 ⋅ 133 ⋅ 520 mm |
| (w/h/d) (173/8 ⋅ 51/4 ⋅ 201/2 |
| inches) |
Mass | Control panel: Approx. 3 kg |
| (6 lb 9 oz) |
| Processor unit: Approx. 14 kg |
| (30 lb 13 oz) |
Signal processing
Sampling rate | Y: 13.5 MHz, |
| 6.75 MHz, KEY: 13.5 MHz |
Quantizing |
Linearity (composite output) Differential gain
Less than 3.5% (composite input) Less than 2% (component,
input)
Differential phase
Less than 2.5º (composite input) Less than 1.0º (component,
Frequency response
0 to 5 MHz + 0.5
S/N | More than 50 dB (composite) |
| More than 55 dB (component, |
| |
System delay | 1 frame (1.5 frames when using an |
| effect pattern having a number |
| between 1000 and 1018, both |
| inclusive) |
| Preread mode: Background bus |
| only 4H |
Input signals
VIDEO INPUT COMPONENT
BNC type
Y:1.0
RGBTo use some of the above COMPONENT connectors.
R/G/B: 0.756
COMPOSITE (with
VIDEO: 1.0
| Y: 1.0 |
| negative, |
| C (BURST): 0.286 |
REF. VIDEO | BNC type ⋅ 2, loop through |
| SYNC: 0.286 |
| BURST: 0.286 |
SDI INPUT | BNC type ⋅ 4 (with |
| ⋅ 8) |
| 270 Mb/s, compliant with SMPTE- |
| 259M |
DSK KEY IN | BNC type ⋅ 2, loop through |
| 1.0 |