Sony DFS-700, DFS-700P manual 98

Operations Advanced 4 Chapter

User Program Effects

Displaying parameter values

The numerical values of the parameters appear in the menu.

Numerical parameter values

Parameter	Function	Value range	Default
Loc-X	Movement along x-axis	–800 to +800 a)	0
Loc-Y	Movement along y-axis	–600 to +600 b)	0
Loc-Z	Magnification	0 to 200	100
KfDur	Key frame duration	1 to 100	50
Rot-X	Rotation about the x-axis	–400 to +400 c)	0
Rot-Y	Rotation about the y-axis	–400 to +400 c)	0
Rot-Z	Rotation about the z-axis	–400 to +400 c)	0
Pers	Perspective	0 to 400	200
Angle	Direction of folding	–100 to +100 c)	20
Offset	Degree of modification	0 to 200	0
Rot-Z	Rotation about the z-axis	–400 to +400 c)	0
Radius	Radius	0 to 100	0
FORM	Type of modification	TURN, ROLL, SPHERE d)	TURN

a)600 corresponds to the full width of the screen.

b)300 corresponds to the full height of the screen.

c)100 corresponds to 360 degrees.

d)For SPHERE, the Angle and the Radius parameter do not function.

Resetting the parameters to their initial values

•To reset all of the parameters, hold down the INITIAL button, and press the PATTERN ADJ button.

The initial values of the parameters are for an unmodified image occupying the whole screen.

•To reset all of the parameters on a particular page, hold down the INITIAL button, and press the PAGE button.

•To reset a particular parameter only, press the corresponding function button while holding down the INITIAL button.

4-8Chapter 4 Advanced Operations