To change the key frame parameters
After carrying out the procedure to step 4 in the section “To recall a user program effect” above, use the following procedure.
5 Press the UP or DOWN button in the pattern/numeric keypad, so that the number of the key frame for which you want to change the parameters appears in the EDIT display window.
6 Change the parameters in the menu.
7 Press the ENTER button.
This saves the changed key frame parameters.
Repeat steps 5, 6, and 7, to change the key frame parameters in all desired key frames in turn.
8 When all the changes are made, EDIT button.
The button goes off, and the modified user program effect is resaved.
Operations Advanced 4 Chapter
Chapter 4 Advanced Operations