Operation Basic 3 Chapter
DME Switcher IntroductionExample Operation (1): Wipe
In this example we’ll use the AUTO TRANS button, to make a wipe, with the new image appearing from the center of the screen.
Setting items
As an example, we’ll set the control panel as follows.
Background image (the image output before the transition): video
signal connected to the VIDEO INPUT 1 connector
Foreground image (the image output after the transition): video signal connected to the VIDEO INPUT 2 connector
Effect: wipe (pattern number 24)
Transition time: 30 frames
Program output
Executing the above effect produces the following changes in the output on a program monitor connected to the PGM OUT connector of the processor unit.
Start of effect | Transition time | End of effect |
|