of Function and Location 2 Chapter Controls and Parts

Control Panel

3Effect transition section

2Display window mode indicators

1 TRANS RATE display window

 

3 SET button

 

 

EFFECT

 

 

TRANS RATE

DSK

 

 

 

FTB

SET

9 N/R button

4 MIX button

 

 

q; REV button

MIX

EFFECT

N/R

REV

5EFFECT button

TITLE

6 TITLE button

CUT

 

 

qa Fader lever

 

 

7 CUT button

 

qs Fader lever stiffness

 

 

 

AUTO

adjusting screw

8 AUTO TRANS button

 

TRANS

qd Transition indicator

 

 

 

1TRANS (transition) RATE display window This shows the transition time for effects, downstream keys, and fade-to-black, in units of frames. While you are entering a time, the dot at the lower right of each numeral lights.

2Display window mode indicators

These indicate the kind of transition time shown in the TRANS RATE display window.

EFFECT: Transition time of an effect

DSK: Transition time of a downstream key

FTB: Transition time of a fade-to-black

3SET button

To set the transition time for an effect, downstream key, or fade-to-black, press this button, turning it on. While it is lit, each time you press, the display window mode indicators change. To set the transition time corresponding to the display of the display window mode indicators, enter the value using the pattern/ numeric keypad.

4MIX button

To carry out the next transition without applying an effect pattern, but as a mix, press this button, turning it on.

5EFFECT button

To carry out the next transition with an effect pattern applied, press this button, turning it on.

6TITLE button

To carry out an effect or a mix in title mode, press this button, turning it on. The title keying is carried out, inserting the characters and graphics with the effect pattern and transition settings applied.

7CUT button

Press this button to carry out an instantaneous transition.

8AUTO TRANS (automatic transition) button Press this button to carry out an effect automatically. When you press this button, the effect is carried out automatically, with the transition time which has been set. During the transition this button is lit. Pressing this button during the transition pauses it. Press the button once more to resume the transition.

If you set the fader lever to an intermediate position and press this button, the transition pauses at the position corresponding to the fader lever position.

2-4

Chapter 2 Location and Function of Parts and Controls