4-7-2 Setting the Indicator

Select the items to be indicated by the indicator from the ‘!’ LED page of the setup menu. Note that at the factory the ‘!’ page is not set for display. To access the ‘!’ LED page, either set the camcorder to engineer mode, or select the ‘!’ LED page from the MENU SELECT page before use.

See Section 4-6-1 “Setup Menu Configuration” (page 4-37) for more information

about the engineer mode and selecting the display page.

Follow the procedure below to set the indicator.

1,2,6

2,4,5

3

Setting the indicator

1 Set the MENU ON/OFF/PAGE switch to ON.

4

The display for setting the status disappears from the viewfinder screen, and the page that was on the screen when the last menu operation ended appears.

(When this menu is first used, the lowest-numbered page of the currently selected pages for configuring the menu appears.)

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-47