6 Mount the microphone into the cradle suspension.

Microphone

7 Connect the microphone cable to the AUDIO IN connector for

5

 

 

channel 1 or 2. Set the corresponding AUDIO IN switch to REAR. Set the LINE/MIC/+48 V ON selector to +48 V ON or MIC in accordance with the type of the microphone power supply.

Notes

•You can only connect an external power supply type microphone to the MIC IN connector.

•If the microphone you connect to the AUDIO IN CH-1/CH-2

connector is of the external power supply type, set the appropriate LINE/MIC/+48 V ON selector to +48 V ON.

Otherwise, set the selector to MIC.

Chapter 5 Setting Up the Camcorder 5-27