Changing the display mode
The currently set display mode appears on the VF DISPLAY page of the setup menu. Follow the procedure below to change it.
1,4
4 1,2,3
1
Changing the display mode
1
2
3
Follow steps 1 to 3 in Section
Press the rotary encoder so that a question mark appears to the left of the display mode indication, then turn the rotary encoder to change the display mode selection.
When the setting is completed, press the rotary encoder.
The question mark to the left of the display mode indication disappears.
4 To end the menu operation, set the MENU ON/OFF/PAGE switch to OFF.