!• REMOTE (remote control) connector (6-pin)
Connect the RM-P9 Remote Control Unit (not supplied) or VA-DN1 Camcorder Interface Adaptor (not supplied) to this connector.
2 By connecting a camcorder interface adaptor, you can control the VTR from a 9-pin remote control device.
Notes
•When the RM-P9 Remote Control Unit is connected, the setup menu is displayed on the monitor, regardless of the internal board setting.
•If the REMOTE and TEST OUT connectors are used at the same time, it may not be possible to generate video signals at standard levels.
!ª VIDEO OUT (video output) connector (BNC type)
This connector outputs a composite signal (standard level, 75-ohm terminated) to the video monitor. If the video monitor is connected here, you can monitor the picture being shot by the camcorder as well as the picture recorded by the VTR. When synchronizing the time code of an external VTR with that of the camcorder, connect this connector to the video input connector of the external VTR.
2-22Chapter 2 Locations and Functions of Parts and Controls
