5 To change the card ID, press the MENU CANCEL/PRST/ITEM switch toward the CANCEL position.
If a correction is required after once pressing the rotary encoder, press the rotary encoder once again, to display the cursor above the card ID and enable correction (returning to the state in step 2).
Notes
• Shot | 4 |
| |
Therefore, if shot |
|
through the SETUP CARD page for data stored in the camera, other |
|
data than shot |
|
shot |
|
•To set or modify only the card ID of data stored on a card, read the data from the card to the camcorder, set or modify the card ID, then write that data back to the card.
Chapter 4 Adjustments and Settings for Recording