3 Set the DATA DISPLAY switch to
4 Set the user bits, using the SHIFT and ADVANCE buttons. SHIFT: Selects a digit to set. Each time you press it, the flashing
column moves one to the right.
Pressing this button while holding down the HOLD button moves the flashing digit one to the left.
ADVANCE: Increments the value of the flashing digit.
4 Pressing this button while holding down the HOLD button decrements the flashing digit.
Hexadecimal digits A to F are displayed as follows:
Hexadecimal | A | B | C | D | E | F |
Display | A | b | C | d | E | F |
|
|
|
|
|
|
|
5 Set the
The specified user bits will be recorded in the LTC and VITC.
Storing the user bits in memory
The user bits setting (apart from the real time) is stored in memory when the power is turned off.