4 After checking the points below load the cassette, and close the cassette lid.

•The cassette is not write-protected.

•There is no slack in the tape.

•The leader tape is wound on the take-up reel.

3 Basic procedure for shooting : from adjusting the black balance and white balance to stopping recording

After turning on the power and loading a cassette, set the switches and selectors as shown below and begin operation.

 

AUDIO SELECT

DISPLAY: ON

CH-1/CH-2: AUTO

Iris: Automatic

Zoom: Automatic GAIN: Set as

low as possible.

OUTPUT/ DCC: CAM,

DCC ON

F-RUN/SET/R-RUN: F-RUN or R-RUN (set as needed)

Switch and selector settings before shooting

3-6Chapter 3 Recording and Playback