ON/OFF of safety zone marker
∗ ∗indicator
MARKER 1/2
Safety zone area setting
mSAFETY ZONE : ON
SAFETY AREA : 90%
|
| CENTER | : ON | ON/OFF of center marker indicator |
|
| CENTER H | : |
|
|
| CENTER V | : |
|
|
|
|
| Setting of display position of center |
|
|
|
| marker (horizontal) |
4 |
|
|
| Setting of display position of center |
|
|
| ||
|
|
| marker (vertical) | |
|
|
|
|
|
MARKER 1/2 page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the desired item (or use the rotary encoder).
4 For each item, operate the rotary encoder as follows (directions indicated as seen from the front of the camera).
CENTER or SAFETY ZONE selections: For an “ON” display setting, turn the rotary encoder counterclockwise; for an “OFF” display setting, turn the rotary encoder clockwise.
SAFETY AREA selection: To set the safety zone to 100% of the screen area, turn the rotary encoder counterclockwise, and to set the safety zone to 80% of the screen area, turn the rotary encoder clockwise.
CENTER H selection: To move the center marker to the right in the viewfinder, turn the rotary encoder counterclockwise, and to move the center marker to the left in the viewfinder, turn the rotary encoder clockwise.
CENTER V selection: To move the center marker up in the viewfinder, turn the rotary encoder counterclockwise, and to move the center marker down in the viewfinder, turn the rotary encoder clockwise.