6-1 Testing the Camcorder
Before Shooting
Check the functions of the camcorder before setting out for a shooting session, preferably by operating the camcorder together with a color video monitor.
Follow the procedure below.
3 4 1
2
Preparations for testing
1 Load a fully charged battery pack.
2 Set the POWER switch to ON, and check that the HUMID indicator
does not appear and that the BATT indicator shows at least five segments. When using a
•If the HUMID indicator appears, wait until it disappears.
•If the BATT indicator does not show at least five segments, replace the battery pack with a fully charged one.
3 Check that there are no obstructions near the cassette lid, then press the EJECT button to open the cassette lid.
(Continued)
Chapter 6 Maintenance |
6
Maintenance